Saturday, November 19, 2011

Singer 328 K

I know that Bill Holman does not like these machines.  He is a very famous sewing machine guru who owns a couple of the sewing machine Yahoo groups.  I do like this machine.  It makes a pretty nice stitch and is strong and fast.   I bought it this past spring and cleaned it all up and oiled it.   Today I loosened the belt and adjusted the tension and now it is sewing just perfectly.  I think it is the perfect machine for a beginner sewist.
So I guess it is off to Craigs List now. 

65 comments:

  1. I have always thought these machines sounded a little loud, and for some reason, like a tractor....so I call this model a tractor. (Hope I just didn't scar you for life!)

    ReplyDelete
  2. I've had a 328 K for decades, and it's worked well for me. I have other vintage singers now, and they are better machines. But I still use and love my 328 K, purchased used with my tax return money in the mid-80's.

    ReplyDelete
  3. I think they look like a Mercedes....I wonder why Bill doesn't like them?

    On selling cabinets- I've had better luck selling them (empty) as end tables or desks. I always write (in pencil) in the drawers or somewhere what machine came out of it, in case someone wants to put a machine in it someday. I usually just use Howard's renew before selling them. Also, if they are from the 1950's the phrase "mid century modern" seems to be catnip on Cra-g's List.

    ReplyDelete
  4. Well, frankly who cares what Mr. Bill likes or dislikes. I've been using this model for 23 years and i love it. Here's why. I absolutely love the Singer 328k. It’s a wonderful machine for the beginner, occasional and everyday sewer. It’s great for mending and repair work. It has all the features the majority of sewers could want. With a basic zigzag, overcast stitch and a good range of decorative stitches for the rare times you need them. It comes with the all important yet often don’t get straight stitch foot and needle plate. They were built like a tank and will out last most new machines today. All metal gears in a light weight aluminum body. I love the sewing light is right were it’s needed, spot lighting the needle. And lastly, just like the 400 & 500 series. It comes in that easy on the eyes dark beige color. And if you work with a black or white machine. You know what i mean. If you find a complete one {machine, manual, attachments etc} either local or on e-bay. Grab it, there totally worth the few hundred they go for. This machine is best in a Singer cabinet. And will fit all post 1958 Singer cabinets. Enjoy!

    ReplyDelete
  5. Well, I have to agree with BuffaloSingerGuy. Just tonight I was thinking about how I missed this machine. I sold this one and am glad that I passed it along. I cannot sew on all the machines I have. But lately I have been thinking about machines that I can get and then pass along to new sew-ers. This 328 is just that machine.

    ReplyDelete
  6. Hi, I just acquired a 328K. Help, how do I adjust the belt tighter? It is in beautiful shape and I can't wait to sew with it. The belt appears almost new, but it will not turn the handwheel.

    ReplyDelete
  7. JCP
    I never had to adjust the belt on this 328. The Yahoo group vintagesingers probably can help. Good luck

    ReplyDelete
  8. I just picked one of these up, and the belt was slipping. Used some belt dressing on it (found at car stores) and the belt stopped slipping.

    ReplyDelete
  9. I have a 328K but the motor shot out a few sparks, then smelled and sent up a little flame. Needless to say, it doesn't work afterwards. I believe I need a new motor. SO I googled and found claims that ALL sewing machines take a "universal motor". Is that true for my ~50 year old 328K?
    Thanks,
    Rochelle

    ReplyDelete
    Replies
    1. "Universal motor" doesn't mean that it will fit all sewing machines, it's a technical term describing the type of motor irrespective of its shape, size, power etc. Many machines (drills, vacuum cleaners, garden shredders etc) use universal motors, they're mostly not interchangeable. One type of motor that /is/ pretty standard is the external sort you find bolted to the back of the old black Singers and similar machines - just be sure it includes the mounting bracket, as those are standard where they bolt to the machine, but may be different where they bolt to the motor.

      Delete
  10. Rochelle,
    I believe that you can replace your motor with a universal motor. I recommend you buy one from Jenny at Sew Classic (see resources page) I bought one from her and it is a very nice motor and high quality and quiet.

    ReplyDelete
  11. Thank you Elizabeth! When I was searching, I have unfortunately come across several different universal motors! Are they all alike and can be retrofitted into the space for the motor in my 328K? I really appreciate your advice.
    I have to tell you all about my 328K. It is about 50 years old, I think. It was not used for many years and when I unscrewed surfaces, the insides are covered by a thick yellowish brown guck. We have been slowly taking out every piece, every little screw and soaking them in alcohol and brushing off the guck with an old toothbrush. It will need new belts too! But I think when we are done, it will work and gleam :-)
    Rochelle

    ReplyDelete
  12. Hi All! Here is correspondence I received from a seller of sewing machine motors re my quest for a new motor for my 328K:

    "Rochelle, I think you will have a difficult time converting a standard
    motor, many issues mounting holes do not match up etc. etc. etc... However
    we cannot predetermine someones mechanical ability... We have a standard
    motor #NA35K rated at 7000RPM's, cost $24.95 plus $6.95 S&H. John'

    So this is why I haven't yet tried ordering a "universal" motor. Do you think retrofitting an available new "universal" motor will have the challenges John describes above?
    Thanks!

    ReplyDelete
    Replies
    1. Rochelle
      Without looking at the machine and the motor it is hard to tell. As I now recall, the motor in a 328 is NOT external. Sorry. I suggest that you join VintageSingers and ask there. You may need to get one from a donor machine.

      Delete
  13. My worry about a "universal" motor is that there are a number of them and therefore they may actually not universally fit all older machines. One seller told me that the screw holes may not be in the same place as the original motor. So I still need to know which model # motor can best be fitted into my 328K. It is SO tough getting answers to this from anybody! I contacted Singer and got no answer from them - the very one I thought ought to have the best info! Does anyone here have experience putting a replacement motor into their 328K? [PS Jenny is not available to email back currently}.

    Thank you,
    Rochelle

    ReplyDelete
    Replies
    1. Join VintageSingers Yahoo group.....Really...they can help....honest.....

      Delete
  14. While cleaning the innards of my 328K I found a broken spring. It is part 170179 and this small spring is wrapped around a bolt-like piece labelled as part 140767. these numbers are from a Singer info web page. I think it relates to maintaining thread tension within the machine buut it does not touch the thread at all. There are no names of any part on that web page, only numbers, unfortunately for me. Do you happen to know where I mightt order this? All the web sites I have tried have no answer for me. I have even thought of taking this and the parts of the unit to a hardware store to see if they may have a matching spring for it. What do you think?

    BTW, my motor turns out to look clean and in good shape!

    ReplyDelete
    Replies
    1. Rochelle

      That part looks to be part of the stitch length regulator mechanism according to a schematic I found on Brewer connect. Google 328 K parts, there is a PDF file listed for 328 parts schematic from Brewer Connect. Good luck. I think you have to be a dealer to order parts from them but you might find it elsewhere.

      Delete
  15. Hello all,
    I am thinking of buying a 328 and was wondering what type needle it uses? I know the319 uses a different needle.
    Thanks in advance....
    Sherry

    ReplyDelete
    Replies
    1. The 328K takes a standard size 15 needle also known as a 130/705 system. the 319/306 and 206 take the 206X 13 sized needle.
      You can buy the standard needle anywhere fine (and not so fine) sewing machine needles are sold.

      Delete
  16. I cleaned my Singer 328k but wasn't able to test it out because I need a new plug for it. After recently using a Singer 600 Slant needle sewing machine, I was surprised at how far back the vertical needle on the 328k seems to sit on the bed.

    ReplyDelete
  17. Hi I just purchased a singer 328k but the thread keeps on ripping. Please help as I'm complete newbie to this but can't wait to start sewing. Thanks

    ReplyDelete
  18. Can you all please tell me the difference between a 328 and a 328k? Thank you!

    ReplyDelete
  19. I just bought a sewing cabinet at a garage sale for $30.00 and discovered a Singer 328K inside, barely hanging on 1 screw. I am refinishing the cabinet and decided to take apart and clean the machine. My 328K has a decal stating it was Made in Great Britain. Many of the parts also have Great Britain stamped on them. I saw on the Singer web site to look for 328 manuals, etc. SO, possibly the K stands for the fact that this machine is a 328 but made in Great Britain. My electrical cord has been cut and pieced (hiding under duct tape).I was wondering about the difference in electrical power in the UK in the '60's.

    ReplyDelete
    Replies
    1. I think that if the motor is 110 you should be ok. Lots of singers were made in kilbowie, Scotland (hence the K) and marketed in the US. I have had plenty of K machines pass through here that are 110.

      Delete
    2. I have just purchased a 328P which I guess means that it came from Penrith Singer Factory. I think they were put together with parts from Scotland and distributed from the Penrith Factory, being at least second hand, it came incomplete,without a lid...that's fine, as it came with manual and 6 cams. Its pinkish...that's more than fine, but the needle-bar clamp is missing the part that the thread slips through before it enters the needle-hole, so of course it sews a few stitches and then the thread breaks...that's not so fine. Now to get a replacement part or make a repair...mmm, but it promises to be a wonderful sew-mate!

      Delete
    3. I can tell you that the 328P model comes from the Penrith Australia factory which was a subsidiary of Singer. You can read more about it on this link: http://www.singersewinginfo.co.uk/penrith/
      I bought one of these brand new in 1966. It was a major disappointment to me, not the quality of the 328K which I believe is made in England. My 328P could not sew a precise straight stitch and zig-zag was impossible on anything finer than cotton drill fabric. Also, the thread constantly broke. It spent more time back at the Singer repair shop than doing any sewing. I do hope you have had better luck than I did.

      Delete
    4. I have a 328k that was made in Great Britain in the 60's also and it works just fine with the regular American electrical system. I got it handed down from my mother who had it for some 50 years here in Alabama. She made clothes for all of us kids over the years and even used it for covering some couches.

      Delete
    5. i think the k means that it was made at the Kilbowie plant in Scotland.

      Delete
  20. Hi I have just inherited my mother's 328k. Will this be a good machine for making a quilt? Do you know where I can get a 1/4 quilter foot. Can't wait to get started.

    ReplyDelete
    Replies
    1. This machine will be fine for piecing. I don't know how it will handle a quilt sandwich. You likely can find a 1/4 quilter foot at Jenny at Sew Classic. See the Resources page located at the top of the blog

      Delete
    2. Shiela, I realize this is a bit late but I have a 328 I use for sewing heavy backpack material and it does fine going over up to 6 layers which other machines just stall at, for the sandwich Id really recommend a walking foot over a standard quarter inch foot though. This machine will take any screw on low shank walking foot, also if you havent located the quarter inch foot yet it will take a snap on low shank and feet.

      Delete
  21. Can someone possibly provide their opinion of a Singer 328 vs a Singer 223 Fashion Mate for a beginner?

    Thanks - Jake

    ReplyDelete
    Replies
    1. Sew with each one. The 328 has a class 66 drop in bobbin and takes cams for decorative stitches.The 223 has a front loading class 15 bobbin and has straight stitch, zig zag and blind hem only. The 223 is heavier than the 328 IIRC. Personally I thin a front loading class 15 is better for a beginner because I think it will have less chance for thread nests.

      Delete
  22. Thank you very much for that information.

    ReplyDelete
  23. I have owned this machine for about 33 years and I love it. I have the 328 - Made in England. I was told that the K stands for machines made in Scotland. They are otherwise identical. This is durable and easy to use. I do not find it overly loud. I have never had any problem with it and it has never needed repair.

    ReplyDelete
  24. Hello,
    I am looking for helpful info on my mother-in-law Singer 328K - bobbin case is missing... anybody knows part number, or type, cross-reference? Maybe, even good place to buy it from... appreciate.

    ReplyDelete
    Replies
    1. Dear Anonymous,
      I would love to help you. I choose not to do it in a dialogue through the blog. Please go to the top of the blog and email me via Contact me page.

      Delete
  25. I just bought my very own 328k. I would like to know why some 328k machines have a brass name plate and some don't. I chose to buy one without the brass plate, and would like to buy accessories. Is there s difference?

    ReplyDelete
    Replies
    1. I don't know. The accessories (attachments) are common low shank attachments. the 328 takes the flat cams. Good luck

      Delete
  26. Hi I have had my Singer 328K for years and love it but want to know if you can do Free Motion Sewing on it. My instruction manuel says I can but I can't seem to get my head around how to make it happen! Anyone able to give me any advice?

    Thanks

    ReplyDelete
    Replies
    1. Simplest: set the machine up as normal but remove the presser foot (and be sure to lower the presser foot lever otherwise the upper tension won't work). Then just stitch and move your fabric around. Mind your fingers. You may want to loosen your upper thread tension. You could use a darning foot if you have one. You may need to set the stitch length to zero, or lower or remove the feed dogs. Use an embroidery hoop to keep the fabric flat and easy to manoeuvre. Use a zigzag stitch to paint broad strokes.

      Delete
  27. I was just given a 328K, Great Britain, Singer - (The Sewing Machine Blue Book states that model#328 was manufactured between 1963 and 1965). It does not have the push on/push off light button that many 328Ks have. How do I turn on/off the light without unplugging the machine? Thanks ahead of time.

    ReplyDelete
    Replies
    1. You don't. There is no on/off switch for the light on the earliest 328s.

      Delete
    2. I use a standard power strip, which has a built in fuse and off/on switch. This allows me to plug in my machine, iron, and an additional table lamp; then I an turn everything on/off with one switch.

      Delete
  28. I have a 328K and just purchased low shank snap on feet and the low shank adapter. Both fit by machine and seem like they should work well together but the problem is my feet aren't actually attaching to the adapter. I Can't get it to snap on although the bar seats into the adapter it doesn't actually snap on & stay. When I raise my presser bar the foot stays down on the feed dogs while my shank rises up. And my doing something wrong? When I lower the presser bar it seats just fine and it is as if I could see as long as I don't raise the bar back up. I tried snapping on to the adapter off the machine and still can't get it to. I hope all that made sense!

    ReplyDelete
  29. I have just inherited a VINTAGE SINGER STYLE-O-MATIC 328K and i have combed through the manual but i cannot find a lever or button to back stitch. the manual mentions several times about back stitching but there is nothing that refers to making the back stitch work. Does anyone know how to operate this??

    ReplyDelete
    Replies
    1. When you move the Stitch Length Lever all the way to the top the machine will back stitch. Don't screw it down tight. Just move it all the way up.

      Delete
  30. I just bought my Singer 328K off of Craigslist in December and I absolutely LOVE IT! I paid $10 for her complete with her box of attachments, manual and bobbins. She sews like a dream and is very quiet. I have her in a cabinet in my living room.

    ReplyDelete
  31. I just got my first 328 k. I picked her up for only $30. She looks like new runs like a top and I think she's going to become my go-to machine.

    ReplyDelete
  32. Help! I inherited my moms singer 328 and am teaching myself to sew. I had the whole thing cleaned and overhauled at a trusted sewing machine repair shop. It works great and I love it, but occasionally it won feed and I end up with a bunch of knots on the bottom of the piece I'm sewing. I've tried re-threading and replacing the bobbin, but it doesn't help.

    ReplyDelete
    Replies
    1. Sometimes newer bobbins, though they say class 66, cause bobbin thread nests. I have read it is caused by a little lip on the center post, that can catch the upper thread as it passes over. The solution I found is to use vintage only class 66 bobbins; new class 66 PLASTIC bobbins also seem to work nicely in my 328k. Hope this helps.

      Delete
  33. Do you know how I can get a concealed (invisible) zipper foot that will work with the 328K?

    ReplyDelete
  34. It's a low shank machine so any invisible zipper foot that fits a low shank machine should work.

    ReplyDelete
  35. I was given a 328k and would like to get info on how to use the special stich disks. Does anyone know of a site that I could use for information? The machine came with attachments that I have no idea what they are for. The machine was checked out and I was told it is in excellent condition.

    ReplyDelete
  36. I recently found a 328k at a thrift store! The straight stitch on this machine is very good (every bit as good as my singer 201-2, which I also found at a thrift store.)

    ReplyDelete
  37. Inherited one of these years ago and have been using the sewing cabinet as a guest bedroom TV stand and basically forgot that there was a sewing machine in there. But the other day while spring cleaning I pulled it out, cleaned and lubed it then messed around with it for the evening. Sews great, I think better than my three somewhat newer machines. Seemed to power through as many layers of faux leather that I can fit under the foot without a problem, going to give it a go with canvas/cordura.

    ReplyDelete
  38. Good evening, I acquired this very model for free off a relative last year.
    It's in fantastic working order.
    However appears to be missing a bottom bobbin case.
    The bobbin will drop in snug without a case but the thread will not pick up when I run the machine?
    I've tried canvassing the web for parts but no joy.
    I'm at a loss of what to do as I'm really keen to use this sewing machine.

    ReplyDelete
    Replies
    1. Get a user manual. Look at the directions for threading the bobbin. The 328 does not have a removable bobbin case. It takes class 66 bobbins

      Delete
  39. I have a 328k and the thread tension through the upper discs is fine when the presser foot is up but when I lower the presser foot the thread seizes up in the discs. Anyone know the solution to this problem? I'm set right between 4 and 5 on the dial.

    ReplyDelete
    Replies
    1. The tension on the thread is supposed to increase when the presser foot is down. If your thread is too tight, the tension assembly may be dirty or it may be set too high. In addition there could be thread caught in the tension assembly

      Delete
  40. Does this sewing machine have a stretch stitch?

    ReplyDelete
  41. Followed directions to disengage feeder feet but the bobbin plate wont go on

    ReplyDelete
  42. The light on my Singer 328K stopped working. I replaced the bulb and it still isn't working. Any ideas on how to fix it?

    ReplyDelete