Friday, December 25, 2015
Peace on Earth
Sunday, December 20, 2015
HAPPY MESS
I have been sewing out in the loft for much of the week. (VACATION) We have had mild temperatures here in the Leatherstocking Region of NY but I still lit a fire every day. When the CARS panel was approved by the DS for the DGD I moved inside because I wanted to test out the 15-91 in FMQ (Free Motion Quilting). Today I just wanted to work some more on the Log Cabin scrappy quilt.
When I was a kid I was never rewarded for my chores. I did get an allowance, but the work was expected and never tied to the allowance. My sister cleaned the living room and I cleaned the bathrooms. We both had to do dishes and help with dinner at times. Today, as I was trying to motivate myself to do some domestic chores, I wished that I could pay myself every time I did something productive. Five bucks for the laundry, ten bucks for the vacuuming, one hundred bucks for cleaning the bathrooms. Somehow, it wasn't working out. The money is mine anyway and thinking about doing double the work for the same money didn't wash.
Instead, I decided that I would work a little, sew a little. Every time I accomplished a chore, I could spend that much time sewing. I set the ironing board up next to the sewing machine, at just the right height. The smallest cutting mat, my little iron and many scraps created a cozy little corner.
Steven was out paddling with his buddies. After I walked the dogs, I washed one set of slip covers, vacuumed one rug, put away some laundry, mended the dog seat cover for the car, and decided it was time to sew.
I put four blocks together and decided that I wanted to see how they looked. I stapled some batting to the wall in the quilting room and pinned the blocks up.
I made two more just as Steven arrived home.
"Oh you got home before I could clean up the mess!"
"It's a happy mess." How right he is.
The short daylight hours shut me down early. I had hoped to get ten blocks done today; I just couldn't. Six will have to do. The house is still a mess, even worse because one couch is all torn up. The slip covers dry in their own time. I did tidy up my cozy corner, just to have some collateral for when it is time to sew again.
Dinner time and Happy Hour.
When I was a kid I was never rewarded for my chores. I did get an allowance, but the work was expected and never tied to the allowance. My sister cleaned the living room and I cleaned the bathrooms. We both had to do dishes and help with dinner at times. Today, as I was trying to motivate myself to do some domestic chores, I wished that I could pay myself every time I did something productive. Five bucks for the laundry, ten bucks for the vacuuming, one hundred bucks for cleaning the bathrooms. Somehow, it wasn't working out. The money is mine anyway and thinking about doing double the work for the same money didn't wash.
Instead, I decided that I would work a little, sew a little. Every time I accomplished a chore, I could spend that much time sewing. I set the ironing board up next to the sewing machine, at just the right height. The smallest cutting mat, my little iron and many scraps created a cozy little corner.
I put four blocks together and decided that I wanted to see how they looked. I stapled some batting to the wall in the quilting room and pinned the blocks up.
"Oh you got home before I could clean up the mess!"
"It's a happy mess." How right he is.
Thursday, December 17, 2015
CARS
Taking a break from scraps today. Sweet little panel I found at the Quilt zoo. I had the backing fabric. Now all I must do if find a car that goes
BEEP BEEP
I love this 15-91. I hadn't switched it out with the 201-2 in this #42 cabinet before because the foot controller from the 201-2 was wired directly to the machine. I re-wired the foot controller today to a three way (STOP) so that I can easily change machines.
Once upon a time I thought that my machine of choice, if I had to choose only one, would be the 201-2. I may change my mind. This 15-91 is very quiet and it has been my experience that 15-91s are truly close to industrial strength.
BEEP BEEP
Once upon a time I thought that my machine of choice, if I had to choose only one, would be the 201-2. I may change my mind. This 15-91 is very quiet and it has been my experience that 15-91s are truly close to industrial strength.
Too Many Steps
I saw this pattern in a magazine at Betsy's house (actually in her bathroom. You Know.)
It is perfect for scraps and I love to use up scraps.
The instructions advise cutting strips 1 3/4 inches wide. I cut many. The quilt is foundation paper pieced and I didn't realize that until I read further. I trekked off to Office Max and invested 11 cents a copy ( X120). I didn't check the copies against the original though that was recommended in the pattern instructions.
I made the first block and found that it was a bit shy on the edges. The finished block measures 6 1/2 inches mine was off by a good bit, but enough to be absorbed in the seam allowance.
I found a ruler that was marked with a 3/16 line and decided to use that. I told Betsy I had started on the quilt, that I was using up my scraps and that she could use up hers on this too, but I knew that she wouldn't Too Many Steps. Betsy hates that.
The first step is to copy the pattern. I think paper piecing, if the pattern is the correct size, provides a more accurate block in the end. Alternatively, cutting the strips larger would work.
I did trim the pattern to a 7 inch square. I tried using the full 8.5 X 11 but it was too cumbersome.
The next step is to cut two small squares, I made mine 1 3/4 by 2, which isn't really square but allows for adequate seam allowance when trimming. One square is dark and the other is light. I pressed mine right sides together.
I made a funky light box from a sewing machine base and a sewing machine light I had kicking around in the shop. Place the pattern FACE DOWN on the light box and glue (elmer's glue stick works fine and is washable) the WRONG side of the dark square to the #1 block on the pattern. I pressed this after I had it positioned to set the glue.
Flip the pattern over and stitch along the line between 1 and 2. The directions recommend that you sew a few stitches beyond the line but I stopped right on the line for block 3 and back stitched.
Then I folded along the stitched line and trimmed the seam.
Using a piece of cardboard, I folded along seam 3 and trimmed that seam if needed.
Next I pressed the pieces open
Then I selected a dark color for #3 and trimmed it so it was just longer than 1 and 2
Pressed it in place (no glue needed)
and stitched. along line 3.
This process was repeated for the remaining strips. Nine in all.
I trimmed the blocks and started to position them according to the picture. I had a terrible time. I had to use the camera to actually seem the pattern. I thought I had it here
but when I looked through the camera realized I was off
So far this is what I have:
It is perfect for scraps and I love to use up scraps.
The instructions advise cutting strips 1 3/4 inches wide. I cut many. The quilt is foundation paper pieced and I didn't realize that until I read further. I trekked off to Office Max and invested 11 cents a copy ( X120). I didn't check the copies against the original though that was recommended in the pattern instructions.
I made the first block and found that it was a bit shy on the edges. The finished block measures 6 1/2 inches mine was off by a good bit, but enough to be absorbed in the seam allowance.
I found a ruler that was marked with a 3/16 line and decided to use that. I told Betsy I had started on the quilt, that I was using up my scraps and that she could use up hers on this too, but I knew that she wouldn't Too Many Steps. Betsy hates that.
The first step is to copy the pattern. I think paper piecing, if the pattern is the correct size, provides a more accurate block in the end. Alternatively, cutting the strips larger would work.
I did trim the pattern to a 7 inch square. I tried using the full 8.5 X 11 but it was too cumbersome.
The next step is to cut two small squares, I made mine 1 3/4 by 2, which isn't really square but allows for adequate seam allowance when trimming. One square is dark and the other is light. I pressed mine right sides together.
I made a funky light box from a sewing machine base and a sewing machine light I had kicking around in the shop. Place the pattern FACE DOWN on the light box and glue (elmer's glue stick works fine and is washable) the WRONG side of the dark square to the #1 block on the pattern. I pressed this after I had it positioned to set the glue.
Then I folded along the stitched line and trimmed the seam.
Pressed it in place (no glue needed)
This process was repeated for the remaining strips. Nine in all.
I trimmed the blocks and started to position them according to the picture. I had a terrible time. I had to use the camera to actually seem the pattern. I thought I had it here
So far this is what I have:
Wednesday, December 16, 2015
Not the Real Mccoy
Somewhere in my DNA is Scottish blood, but I wouldn't claim to be a real Scottsperson. It is too far back. Nor am I thrifty by nature. Even so, I hate waste. It takes a lot of effort, but I like using up my scraps. I have a stash of strips and love to make the scrappy strip block (see here for previous post).
The other day, after our trip to the vet( check up and shots only), I had a few minutes to sew. Wrigley thought it was a fine idea, too. This was always Wilson's spot on the couch but he never put his head over the back to check out what I was doing. He always seemed content to just be where ever it was that I was. Wrigley is more demonstrative and independent. He will bound across the yard when I call, but lie contentedly in the sun if he wants to be in the yard. I miss Wilson, deeply. Wrigley and Frannie have my heart, too. Lucky me to have them.
The other day, after our trip to the vet( check up and shots only), I had a few minutes to sew. Wrigley thought it was a fine idea, too. This was always Wilson's spot on the couch but he never put his head over the back to check out what I was doing. He always seemed content to just be where ever it was that I was. Wrigley is more demonstrative and independent. He will bound across the yard when I call, but lie contentedly in the sun if he wants to be in the yard. I miss Wilson, deeply. Wrigley and Frannie have my heart, too. Lucky me to have them.
Tuesday, December 15, 2015
BIG BOARD
Even though my ironing board is a big one (TWSS) I still need more ironing room. I saw a big, rectangular ironing board at the The Quilt Zoo last week.
"Oh I NEED one of these!"
"Yup, two by four sheet of plywood, two layers of batting and some muslin," advised Bonnie. "When the muslin wears out, just put on a new piece."
I got to it yesterday. Steven has a collection of scrap wood and we rummaged through to find just the right piece.
"I think half inch plywood will be strong enough." I said, eyeing a very nice specimen of 1/2 inch interior grade AC plywood.
"Okey doke." replied Steven as he set up the saw horses and hauled out the circular saw. I trekked back upstairs to continue cutting up scraps.
Only a few minutes later I heard the door to the loft open. "I need you to come check this out."
That lovely piece of plywood was warped. "I don't think you will want to use it. The 5/8 inch of CDX (which had knots on both sides) is much straighter."
He had to re-glue one edge but within an hour it was ready.
I have some Insul Brite batting. I have had it for years. I keep thinking I might make pot holders or lunch bags one day. Originally I bought it to make insulated shades but decided to go with Warm Windows instead. Even as I pulled the Insul Brite out of the cabinet I hesitated. What if I really do get to those pot holders? Oh shut up, my more sensible self chimed in, it's been fifteen years.
So I cut the piece to fit, stapled it to the board with the shiny side toward the wood not knowing if it makes a difference or not.
I added a piece of batting next and then picked out some canvas from my stash. I don't have any muslin and I figured canvas would last a bit longer anyway.
I serged all the edges of the canvas and wrapped it around the board. I made a hem to slip over the nose of the ironing board. Then I used some vintage ironing board "stays" to secure the canvas to the board. Since they run under the actual ironing board, they serve a dual purpose.
I love it.
"Oh I NEED one of these!"
"Yup, two by four sheet of plywood, two layers of batting and some muslin," advised Bonnie. "When the muslin wears out, just put on a new piece."
I got to it yesterday. Steven has a collection of scrap wood and we rummaged through to find just the right piece.
"I think half inch plywood will be strong enough." I said, eyeing a very nice specimen of 1/2 inch interior grade AC plywood.
"Okey doke." replied Steven as he set up the saw horses and hauled out the circular saw. I trekked back upstairs to continue cutting up scraps.
Only a few minutes later I heard the door to the loft open. "I need you to come check this out."
That lovely piece of plywood was warped. "I don't think you will want to use it. The 5/8 inch of CDX (which had knots on both sides) is much straighter."
He had to re-glue one edge but within an hour it was ready.
I have some Insul Brite batting. I have had it for years. I keep thinking I might make pot holders or lunch bags one day. Originally I bought it to make insulated shades but decided to go with Warm Windows instead. Even as I pulled the Insul Brite out of the cabinet I hesitated. What if I really do get to those pot holders? Oh shut up, my more sensible self chimed in, it's been fifteen years.
So I cut the piece to fit, stapled it to the board with the shiny side toward the wood not knowing if it makes a difference or not.
I serged all the edges of the canvas and wrapped it around the board. I made a hem to slip over the nose of the ironing board. Then I used some vintage ironing board "stays" to secure the canvas to the board. Since they run under the actual ironing board, they serve a dual purpose.
Wednesday, December 2, 2015
OFF THE FRAME
Far from finished, the quilt came off the frame this morning.
Maybe I will go to the Quilt Zoo and hang out there while I do all the hand work. I knotted some threads and pulled them into the batting while the quilt was still on the frame. Sitting with friends, this quilt on my lap, seems like a much better idea.